 |
 |
 |
|
 |
|||
 |
|||
 |
|||
 |
|||
 |
|||
 |
|||
 |
|||
 |
|||
 |
|||
 |
|||
 |
|||
 |
|||
 |
|||
 |
|||
 |
|||
| Environmental
control system
Temperature and humidity are kept at a comfortable level inside the chamber by our low noise (< 50 Dba) recirculating Environmental Control System which is powered by a continual flush of fresh air. The image below shows how the air is circulated through the chamber. Fresh air is introduced into the twin ducts at the top of the chamber and flows through adjustable registers where it mixes into the chamber atmosphere. This air then flows through the chamber and is drawn up into the vertical ducts where part of it is recirculated and the other exhausted from the chamber. The recirculated air is then heated or cooled as necessary to keep the chamber occupants thermally comfortable.
|
Home - News - Triple Lock - TL Gallery - Double Lock - DL Gallery - Single Lock - SL Gallery - Other - Gallery - Features - About - Contact
This website may contain links to other websites outside the domain www.fink.com.au. Because the these websites are not the responsibility of Fink Engineering Pty Ltd, by use of this website you agree that Fink Engineering is not responsible for the availability of such external sites, and does not endorse and is not responsible or liable for anything on or available from such sites or resources. Further to this you acknowledge and agree that Fink Engineering shall not be responsible or liable, directly or indirectly, for any damage or loss caused or alleged to be caused by or in connection with use of or reliance on any such external site.